Belkin 802.11g user manual
Ethernet Link LED Solid: Connected to Ethernet Off: Ethernet disconnected Blinking: Transferring data Green: 10Mbps device connected Amber: 100Mbps device connected.
Perform the following steps from the PC you wish to configure your Bridge from: Note: You must undo these steps once you have completed configuring your Bridge.
Bridge Name Enter the name of your Wireless codex tyranids 6th edition pdf Ethernet Bridge here.
Select Disabled if you have not configured your wireless network to use encryption.Qxd 10/28/03 10:08 AM Page 1 m, belkin Tech Support, uS: 877.736.5771 310.898.1100 ext.The Wireless Setup Wizard screen should automatically appear.Summary of the content on the page.You can now connect the Bridge to any Ethernet-equipped device on your wireless network.The default ssid of ANY will connect your Bridge to the closest network automatically.Starparc Building Boeing Avenue PH Schiph, summary of the content on the page.Gateway IP Adress: update driver for media player windows 7 Enter the IP address of your networks gateway (also known as router).Qxd 10/28/03 10:08 AM Page 11 connecting THE bridge using THE setup wizard.Enter the settings for the wireless network that you will be connecting.
The current settings will usually work.
Default IP address.
Click Next to continue.Turn on your Bridge by connecting the power supply cable to your Bridge.Version Information Shows the firmware version, boot-code version, and hardware version.Qxd 10/28/03 10:08 AM Page 15 connecting THE bridge using THE WEB-based interface Status b a c.Qxd 10/28/03 10:08 AM Page 8 connecting THE bridge using THE setup wizard.The home page is visible to any user who wants to see.